Controller Mgmt (NETCONF Mode)

Context

After the switch changes to the NETCONF mode, it needs to register with the iMaster NCE-Campus for authentication. Before registration authentication, the switch needs to obtain IP address or URL information of the iMaster NCE-Campus to communicate with the platform.

Procedure

Configure the Controller's IP address.
1. Choose Maintenance > System Maintenance > Controller Mgmt to open the Controller Management page.
2. Set Controller address format to IP, as shown in Figure 1.
  Figure 1 Configuring the Controller's IP address
3. Configure an IP address and a port number for the Controller.
4. Click Apply to complete the configuration.
  
  Click Clear to delete the configuration.
Configure the Controller's URL information.
1. Choose Maintenance > System Maintenance > Controller Mgmt to open the Controller Management page.
2. Set Controller address format to URL, as shown in Figure 2.
  Figure 2 Configuring the Controller's URL information
3. Configure a URL and a port number for the Controller.
4. Click Apply to complete the configuration.
  
  Click Clear to delete the configuration.