Device Working Mode

Context

Only the following switch models support NETCONF:

S5720-EI, S5720-HI, S5720I-SI, S5720-LI, S5735-L, S5735S-L, S5735S-L-M, S5720S-LI, S5720S-SI, S5720-SI, S5735-S, S5735S-S, S5735-S-I, S5730-HI, S5730-SI, S5730S-EI, S5731-H, S5731S-H, S5732-H, S5731-S, S5731S-S, S6730-S, S6730S-S, S6720-EI, S6720-HI, S6720S-EI, S6720S-LI, S6720-LI, S6730-H, S6730S-H, S6720S-SI, and S6720-SI

Switches can switch between Traditional management mode and NETCONF mode. In NETCONF mode, the web system supports the functions listed in Table 1.

**Table 1** Description of web system navigation tree (NETCONF mode)
Menu	Submenu
Monitoring	Displays the device panel, device information, device status, top 5 bandwidth usages, logs, alarms, and power supply information.
Configuration Only the S5730-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.	Security Services AAA AAA Profile Mgmt Wireless Services AC Config AP Group AP Config Radio Planning/ Calibration Profile BLE
Diagnosis	Diagnostic Tools: includes one-click information collection, ping and trace route.
Maintenance	System Maintenance License Restart Upgrade Web File Management Patch Log Alarm & Event System (Greeting Configuration is not supported.) Electronic Label SMI Certificate Mgmt Controller Mgmt Device Working Mode AP Maintenance (Only the S5730-HI, S5730-HI, S5731-H, S5731S-H, S5732-H, S6730-H, S6730S-H, and S6720-HI support this function.) AP Upgrade AP Restart Log Account

Procedure

Choose Maintenance > System Maintenance > Device Working Mode to open the Device Working Mode page, as shown in Figure 1.
Figure 1 Device Working Mode
Set the working mode of a switch.
- Traditional management mode: You can configure and manage the switch using SNMP or commands.
- NETCONF mode: You can configure and manage the switch using the Controller.
Click Apply to complete the configuration.