instance (IPFPM-DCP view)

Function

The instance command creates an IPFPM-DCP instance and displays the IPFPM-DCP instance view, or directly displays the view of an existing IPFPM-DCP instance.

The undo instance command deletes an IPFPM-DCP instance.

By default, no IPFPM-DCP instance is created on a DCP.

Format

instance instance-id

undo instance instance-id

Parameters

Parameter	Description	Value
instance-id	Specifies the ID of an IPFPM-DCP instance.	The value is an integer that ranges from 1 to 8355838.

Views

IPFPM-DCP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

The DCP collects statistics data based on measurement instances. Each measurement instance consists of the target flow, TLP, and measurement interval. The MCP reports measurement results based on measurement instances. The MCP summarizes and analyzes statistics data of the same measurement instance on all DCPs, and reports measurement results of target flows.

Prerequisites

Global DCP has been enabled using the nqa ipfpm dcp command.

Follow-up Procedure

Run the flow command to configure a target flow, run the tlp command to configure the TLPs of the measurement instance, and run the interval command to configure the measurement interval.

Precautions

To measure packet loss for a specified service flow, create the same measurement instance on the MCP and DCP.

Example

# Create IPFPM-DCP instance 1.

<HUAWEI> system-view
[HUAWEI] nqa ipfpm dcp
[HUAWEI-nqa-ipfpm-dcp] instance 1