delay-suppression enable

Function

The delay-suppression enable command enables delayed alarm or event reporting.

The undo delay-suppression enable command disables delayed alarm or event reporting.

By default, delayed reporting is enabled.

Only the S5720-EI, S5720-HI, S5730-HI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720S-EI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Format

delay-suppression enable

undo delay-suppression enable

Parameters

None

Views

Alarm view or event view

Default Level

3: Management level

Usage Guidelines

In the event that an alarm or an event is repeatedly generated, you can enable delayed reporting to prevent a large number of repeated alarms or events from being reported to the NMS. You can choose to enable or disable delayed reporting:

Run the delay-suppression enable command to enable delayed reporting.
Run the undo delay-suppression enable command to disable delayed reporting.

Run the delay-suppression enable command in the alarm view to enable delayed alarm reporting. Run the delay-suppression enable command in the event view to enable delayed event reporting.

Example

# Enable delayed alarm reporting.

<HUAWEI> system-view
[HUAWEI] alarm
[HUAWEI-alarm] delay-suppression enable