description (MPAC policy)

Function

The description command configures the description for an MPAC policy.

The undo description command deletes the description of an MPAC policy.

By default, an MPAC policy does not have a description.

Format

description text

undo description

Parameters

Parameter	Description	Value
text	Specifies the description of an MPAC policy.	The value is a string of 1 to 255 case-sensitive characters with spaces supported.

Views

MPAC policy view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

To configure description for a created MPAC policy, use the description command. The descriptions facilitate MPAC policy management on the device.

Prerequisites

An MPAC policy has been created using the service-security policy command.

Example

# Configure a description for an MPAC policy.

<HUAWEI> system-view
[HUAWEI] service-security policy ipv4 huawei
[HUAWEI-service-sec-huawei] description SwitchA-GE0/0/1 to SwitchB-GE0/0/1