display service-security binding

Function

The display service-security binding command displays the MPAC policies bound to an interface or bound globally.

Format

display service-security binding { ipv4 | ipv6 } [ interface interface-type interface-number ]

Parameters

Parameter	Description	Value
ipv4	Indicates the IPv4 MPAC policy.	-
ipv6	Indicates the IPv6 MPAC policy.	-
interface interface-type interface-number	Indicates the interface to which MPAC policies are bound.	-

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To check information about bound MPAC policies, run this command.

The display service-security binding { ipv4 | ipv6 } command displays all MPAC policies bound to interfaces and bound globally.

The display service-security binding { ipv4 | ipv6 } interface interface-type interface-number command displays the MPAC policies bound to a specified interface.

Example

# Display all IPv4 MPAC policies bound on the device.

<HUAWEI> display service-security binding ipv4

Configured  : Global
Policy Name : huawei

Interface  : GigabitEthernet0/0/1
Policy Name: A1

Interface  : Eth-Trunk1
Policy Name: A2

# Display the IPv4 MPAC policies bound to GE0/0/1.

<HUAWEI> display service-security binding ipv4 interface GigabitEthernet 0/0/1

Interface  : GigabitEthernet0/0/1
Policy Name: A1

**Table 1** Description of the display service-security binding command output
Item	Description
Configured	The MPAC policy bound globally. This field has a fixed value of Global. If no MPAC policy is bound globally, this field is not displayed.
Interface	Interface to which MPAC policies are bound.
Policy Name	Name of an MPAC policy.