The device report-interval command sets the interval at which an AP reports incremental wireless device information.
The undo device report-interval command restores the default interval at which an AP reports incremental wireless device information.
By default, an AP reports incremental wireless device information to an AC at an interval of 300 seconds.
Parameter |
Description |
Value |
|---|---|---|
interval |
Specifies the interval at which an AP reports incremental wireless device information. |
The value is an integer that ranges from 60 to 3600, in seconds. |
Usage Scenario
The monitoring AP buffers information about detected wireless devices at the interval set using the device report-interval command. When the interval is reached, the monitoring AP reports the information to the AC and then clears the reported information.
Prerequisites
The device detection function has been enabled using the wids device detect enable command for the AP.
# Set the interval at which an AP reports incremental wireless device information to 120 seconds.
<HUAWEI> system-view [HUAWEI] wlan [HUAWEI-wlan-view] ap-group name office [HUAWEI-wlan-ap-group-office] radio 0 [HUAWEI-wlan-group-radio-office/0] wids device detect enable [HUAWEI-wlan-group-radio-office/0] quit [HUAWEI-wlan-ap-group-office] quit [HUAWEI-wlan-view] wids-profile name office [HUAWEI-wlan-wids-prof-office] device report-interval 120