device synchronization-interval

Function

The device synchronization-interval command sets the interval at which an AP reports all wireless device information.

The undo device synchronization-interval command restores the default interval at which an AP reports all wireless device information.

By default, an AP reports all wireless device information to an AC at an interval of 360 minutes.

Format

device synchronization-interval interval

undo device synchronization-interval

Parameters

Parameter	Description	Value
interval	Specifies the interval at which an AP reports all wireless device information.	The value is an integer that ranges from 120 to 360, in minutes.

Views

WIDS profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

An AP reports wireless device information in the following modes:

Incremental reporting: The AP reports the added, changed, or deleted information to the AC in real time.
All information reporting: The AP periodically reports all wireless device information to the AC.

To ensure that detected device information is consistent on the AP and AC, run the device synchronization-interval command to enable the AP to periodically synchronize wireless device information to the AC.

Prerequisites

The device detection function has been enabled using the wids device detect enable command for the AP.

Example

# Set the interval at which an AP reports all wireless device information to 120 minutes.

<HUAWEI> system-view
[HUAWEI] wlan
[HUAWEI-wlan-view] ap-group name office
[HUAWEI-wlan-ap-group-office] radio 0
[HUAWEI-wlan-group-radio-office/0] wids device detect enable
[HUAWEI-wlan-group-radio-office/0] quit
[HUAWEI-wlan-ap-group-office] quit
[HUAWEI-wlan-view] wids-profile name office
[HUAWEI-wlan-wids-prof-office] device synchronization-interval 120