display air-scan-profile

Function

The display air-scan-profile command displays information about air scan profiles.

Format

display air-scan-profile { all | name profile-name }

Parameters

Parameter	Description	Value
all	Displays information about all air scan profiles.	-
name profile-name	Displays information about a specified air scan profile.	The air scan profile name must already exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display air-scan-profile command to view information about air scan profiles.

Example

# Display information about all air scan profiles.

<HUAWEI> display air-scan-profile all
------------------------------------------------------------
Profile name        Reference
------------------------------------------------------------
default             2
huawei              1
------------------------------------------------------------
Total: 2

**Table 1** Description of the **display air-scan-profile all** command output
Item	Description
Profile name	Name of an air scan profile.
Reference	Number of times that the air scan profile is referenced.

# Display information about the air scan profile huawei.

<HUAWEI> display air-scan-profile name huawei
------------------------------------------------------------
Scan switch       : enable
Scan period(ms)   : 80
Scan interval(ms) : 3000
Scan channel-set  : dca-channel
Scan enhancement  : enable
------------------------------------------------------------

**Table 2** Description of the **display air-scan-profile name** command output
Item	Description
Scan switch	Whether air scanning is enabled. To configure the parameter, run the scan-disable command.
Scan period(ms)	Air scan period. To set the air scan period, run the scan-period command.
Scan interval(ms)	Air scan interval. To set the air scan interval, run the scan-interval command.
Scan channel-set	Air scan channel set. To set the air scan channel set, run the scan-channel-set command.
Scan enhancement	Whether the scanning enhancement function is enabled. To configure the scanning enhancement function, run the scan-enhancement command.