display anti-interference config

Function

The display anti-interference config command displays the configuration of the anti-interference algorithm.

Format

display anti-interference config

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display anti-interference config command displays the configuration of the anti-interference algorithm.

Example

# Display the configuration of the anti-interference algorithm.

<HUAWEI> display anti-interference config
------------------------------------------
Anti-interference switch       : enable
Per-packet-TPC switch          : enable
Dynamic CCA upper threshold    : -70
Dynamic CCA lower threshold    : -82
Edge STA SNR threshold         : 22
Edge STA RSSI threshold        : -70
------------------------------------------

**Table 1** Description of the **display anti-interference config** command output
Item	Description
Anti-interference switch	Whether the anti-interference algorithm is enabled. To configure this parameter, run the anti-interference disable command.
Per-packet-TPC switch	Whether the packet-based power adjustment function is enabled. To configure this parameter, run the anti-interference per-packet-tpc disable command.
Dynamic CCA upper threshold	Upper dynamic CCA threshold.
Dynamic CCA lower threshold	Lower dynamic CCA threshold.
Edge STA SNR threshold	Threshold for determining an edge STA based on the SNR.
Edge STA RSSI threshold	Threshold for determining an edge STA based on the RSSI.