display alarm information

Function

The display alarm information command displays alarm configurations.

Format

display alarm information [ name alarm-name ]

Parameters

Parameter	Description	Value
name alarm-name	Displays the configuration of a specified alarm. If this parameter is not set, configurations of all alarms are displayed.	The value is a string and varies according to the registered device type.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To view alarm configurations on the device, run the display alarm information command.

If no alarm name is specified, information about all alarms in the system will be displayed.

In addition, to change the severity level of an alarm, you can run the alarm-name alarm-name severity severity command.

Example

# Display the configuration of the alarm named linkUp.

<HUAWEI> display alarm information name linkUp
**********************************                                              
  AlarmName: linkUp                                                             
  AlarmType: Resume Alarm                                                       
  AlarmLevel: Cleared                                                           
  Suppress Period: NA                                                           
  CauseAlarmName: linkDown                                                      
  Match VB Name: ifIndex                                                        
**********************************

**Table 1** Description of the display alarm information command output
Item	Description
AlarmName	Name of an alarm.
AlarmType	Alarm type: Alarm: indicates a fault occurs. Resume Alarm: indicates a fault is rectified.
AlarmLevel	Alarm severity. To set this parameter, run the alarm-name severity command.
Suppress Period	Alarm reporting delay. To set this parameter, run the suppression alarm-name command. If this field displays NA, this alarm does not support the delayed alarm reporting function.
CauseAlarmName	Name of the root-cause alarm. Name of the root-cause alarm, namely, paired alarm name.
Match VB Name	Matching content of paired alarms.