display ap resource

Function

The display ap resource command displays the number of CAPWAP tunnel resources used by APs on a device.

Format

display ap resource slot slot-id

Parameters

Parameter	Description	Value
slot slot-id	Specifies the slot ID of a device.	The value must be set according to the device configuration.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check the number of CAPWAP tunnel resources used by APs on a device.

Example

# Display the number of CAPWAP tunnel resources used by APs on a device.

<HUAWEI> display ap resource slot 0
  Slot  0
-------------------------------------------------------------------------
  Number Used :0
  Number Free : 1024
  Number Total: 1024
-------------------------------------------------------------------------

**Table 1** Description of the **display ap resource** **slot** *slot-id* command output
Item	Description
Number Used	Number of CAPWAP tunnel resources used by APs.
Number Free	Number of available CAPWAP tunnel resources.
Number Total	Total number of CAPWAP tunnel resources on the device.