display ap run-info

Function

The display ap run-info command displays the running status of an AP.

Format

display ap run-info { ap-name ap-name | ap-id ap-id }

Parameters

Parameter	Description	Value
ap-name ap-name	Displays the running status of the AP with a specified name.	The AP name must exist.
ap-id ap-id	Displays the running status of the AP with a specified ID.	The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

This command displays the AP running status. You can run this command to monitor an AP in real time.

Prerequisites

The AP works properly.

Example

# Display the running status of AP huawei.

<HUAWEI> display ap run-info ap-name huawei  
--------------------------------------------------------------------------------
AP type                       : AP4051DN
Country code                  : CN
Software version              : V200R019C10
Hardware version              : Ver.A
BIOS version                  : 623
BOM version                   : 000
Memory size(MB)               : 256
Flash size(MB)                : 64
SD Card size(MB)              : -
Manufacture                   : Huawei Technologies Co., Ltd.
Software vendor               : Huawei Technologies Co., Ltd.
Online time(ddd:hh:mm:ss)     : 6H:56M:26S
Run time(ddd:hh:mm:ss)        : 6H:59M:51S
NAT IP address                : 2.2.2.1
IP address                    : 192.168.109.252
IP mask                       : 255.255.255.0
Gateway                       : 192.168.109.1
DNS server                    : 0.0.0.0
AP mode                       : campus 
GigabitEthernet port 0
  Port speed(Mbps)            : 1000
  Port speed mode             : auto
  Port duplex                 : full
  Port duplex mode            : auto
  Port state                  : down
  STP down recovery time(ddd:hh:mm:ss)        : - 
GigabitEthernet port 1
  Port speed(Mbps)            : 1000
  Port speed mode             : auto
  Port duplex                 : full
  Port duplex mode            : auto
  Port state                  : up
  STP down recovery time(ddd:hh:mm:ss)        : - 
Card status                   : slot usb: -  
--------------------------------------------------------------------------------

**Table 1** Description of the **display ap run-info** command output
Item	Description
AP type	AP type.
Country code	Country code.
Software version	Software version of an AP.
Hardware version	Hardware version of an AP.
BIOS version	BIOS version of an AP.
BOM version	BOM version of an AP.
Memory size(MB)	Memory size of an AP, in MB.
Flash size(MB)	Flash memory size of an AP, in MB.
SD Card size(MB)	SD card size of an AP, in MB.
Manufacture	Manufacturer of an AP.
Software vendor	AP software manufacturer.
Online time(ddd:hh:mm:ss)	AP online duration.
Run time(ddd:hh:mm:ss)	Running duration of an AP.
NAT IP address	This item is displayed only when the AP is on the private network and the AC is on the public network in NAT scenarios. The value of this parameter is the translated public IP address of the AP.
IP address	AP IPv4 address.
IP mask	IP address mask of an AP.
Gateway	Gateway IP address of an AP.
DNS server	IP address of the DNS server.
AP mode	AP mode. campus: The AP is not added to a branch group.
XGigabitEthernet port number	ID of the AP's XGigabitEthernet port. This item is displayed only for an AP with an XGigabitEthernet port.
MultiGE port number	ID of the AP's MultiGE port. This item is displayed only for an AP with a MultiGE port.
GigabitEthernet port number	ID of the AP's Ethernet interface.
Ethernet port number	Number of the AP's Ethernet port. This item is displayed only for an AP with an Ethernet port.
Port speed(Mbps)	Rate on the upstream Ethernet interface, in Mbit/s.
Port speed mode	Rate mode of the upstream Ethernet interface, including automatic and non-automatic negotiation modes.
Port duplex	Duplex type of the upstream Ethernet interface, including full duplex and half duplex.
Port duplex mode	Duplex mode of the upstream Ethernet interface, including automatic and non-automatic negotiation modes.
Port state	AP interface status. down: indicates that the interface is disabled. up: indicates that the interface is enabled. admin shutdown: indicates that the interface is shut down. stp shutdown: indicates that STP on the interface is disabled.
STP down recovery time(ddd:hh:mm:ss)	Remaining recovery time of the STP.
Card status	IoT card status. -: indicates that the IoT card is not in position. present: indicates that the IoT card is in position.