display ap rtu status

Function

The display ap rtu status command displays the RTU license loading status of APs.

This function will be available for APs in later versions. Currently, it can be executed on the AC but does not take effect.

Format

display ap rtu status { all | ap-id ap-id }

Parameters

Parameter	Description	Value
all	Displays the RTU license loading status of all APs.	-
ap-id ap-id	Displays the RTU license loading status of the AP with a specified ID.	The AP ID must exist.

Views

WLAN view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

After loading RTU licenses to APs, you can run this command to check the RTU license loading status.

Prerequisites

An RTU license package has been unzipped and RTU licenses have been automatically delivered to the APs by using the ap load rtu command.

Example

# Display the RTU license loading status of all APs.

<HUAWEI> display ap rtu status all
---------------------------------------------------
APID    SN                               RTU status
---------------------------------------------------
0       2102351TYR10KB029401              Downloading
---------------------------------------------------
Total:1

**Table 1** Description of the **display ap rtu status** command output
Item	Description
APID	AP ID.
SN	AP SN.
RTU status	RTU license loading status. Active Not active(Need reboot): The RTU license has been stored and is valid. A restart is required for the license to take effect. No license: The RTU license has not been delivered. Memory not enough: The AP has insufficient local memory to store the RTU license. Invalid license: The delivered RTU license is invalid. Not support: The AP does not support RTU licensing. Downloading: The load operation is performed, but the RTU license has not been delivered to the AP.