display ap sta-signal strength

Function

The display ap sta-signal strength command displays the average signal strength of STAs connected to an AP.

display ap sta-signal strength { ap-name ap-name | ap-id ap-id } [ radio radio-id ]

Parameter	Description	Value
ap-name ap-name	Displays the average signal strength of STAs connected to the AP with a specified name.	The AP name must exist.
ap-id ap-id	Displays the average signal strength of STAs connected to the AP with a specified ID.	The AP ID must exist.
radio radio-id	Displays the average signal strength of STAs connected to a specified AP radio.	The radio ID must exist.

All views

1: Monitoring level

You can run this command to view the average signal strength of STAs connected to an AP.

# Display the average signal strength of STAs connected to AP huawei.

<HUAWEI> display ap sta-signal strength ap-name huawei
Station signal strength(dBm): 0

**Table 1** Description of the **display ap sta-signal strength** command output
Item	Description
Station signal strength(dBm)	Average signal strength of STAs.