display ap wired-port

Function

The display ap wired-port command displays AP wired interface configuration.

Format

display ap wired-port interface-type interface-number { ap-name ap-name | ap-id ap-id }

Parameters

Parameter	Description	Value
interface-type interface-number	Specifies the type and number of an AP's wired interface.	The interface type and number need to be selected according to the actual device.
ap-name ap-name	Specifies an AP name.	The AP name must exist.
ap-id ap-id	Specifies an AP ID.	The AP ID must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can use this command to view configurations on an AP's wired interface.

Example

# Display GE interface configuration of AP huawei.

<HUAWEI> display ap wired-port gigabitethernet 0 ap-name huawei
--------------------------------------------------------------------------------
Wired port number             : 0
Wired port type               : GigabitEthernet
Wired port description        :
Wired port workmode           : endpoint
Wired port STP                : disable
Wired port user isolate       : disable
Wired port PVID VLAN          : -
Wired port VLAN tagged        : -
Wired port VLAN untagged      : -
Wired port Eth-trunk          : -
Wired port LLDP               : enable
Wired port LLDP basic TLV management address: enable
Wired port LLDP basic TLV port description  : enable
Wired port LLDP basic TLV system capability : enable
Wired port LLDP basic TLV system description: enable
Wired port LLDP basic TLV system name       : enable
Wired port CRC warn switch    : No
Wired port CRC warn high threshold : 50
Wired port CRC warn low threshold  : 20
-------------------------------------------------------------------------------- 
Traffic Type                        Direction  AppliedRecord                             
---------------------------------------------------------------------------------------- 
traffic-filter                      inbound    IPv4 ACL 3012                             
---------------------------------------------------------------------------------------- 
---------------------------------------------------------------------------------------- 
Traffic Type                        Direction  RemarkType  RemarkValue  AppliedRecord     
---------------------------------------------------------------------------------------- 
traffic-remark                      outbound   802.1p      2            IPv6 ACL 3011     
------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------

**Table 1** Description about the **display ap wired-port gigabitethernet 0 ap-name** command output
Item	Description
Wired port number	Number of the wired interface.
Wired port type	Type of the wired interface.
Wired port description	Description of the wired interface.
Wired port workmode	Mode of the wired interface.
Wired port STP	Whether STP is enabled on the wired interface.
Wired port user isolate	Whether user isolation is enabled on the wired interface.
Wired port PVID VLAN	PVID of the wired interface.
Wired port VLAN tagged	VLAN to which the interface is added in tagged mode.
Wired port VLAN untagged	VLAN to which the interface is added in untagged mode.
Wired port Eth-trunk	Trunk ID to which the wired interface is bound.
Wired port LLDP	Whether LLDP is enabled on the wired interface.
Wired port LLDP basic TLV management address	TLV of the management IP address of the wired interface.
Wired port LLDP basic TLV port description	TLV of wired interface description.
Wired port LLDP basic TLV system capability	TLV of the wired interface capability set.
Wired port LLDP basic TLV system description	TLV of wired interface system description.
Wired port LLDP basic TLV system name	TLV of the wired interface system name.
Wired port CRC warn switch	Whether to enable the alarm function for CRC errors on the wired interface.
Wired port CRC warn high threshold	Upper alarm threshold for CRC errors on the wired interface.
Wired port CRC warn low threshold	Lower alarm threshold for CRC errors on the wired interface.
Traffic Type	ACL-based packet filtering and re-marking implemented by the AP wired port. traffic-filter traffic-remark
Direction	Incoming or outgoing packets.
AppliedRecord	IPv4/IPv6/L2 packet filtering and re-marking based on ACLs.
RemarkType	Protocol type. dscp dot1p
RemarkValue	Protocol type value. dscp: 0-63 dot1p: 0-7

# Display Eth-trunk interface configuration of AP huawei.

<HUAWEI> display ap wired-port eth-trunk 0 ap-name huawei
------------------------------------------------------------------------------
Eth-trunk ID                        : 0
Eth-trunk description               : -
Workmode                            : root
STP                                 : disable
User isolate                        : disable
PVID VLAN                           : -
VLAN tagged                         : -
VLAN untagged                       : -
-------------------------------------------------------------------------------- 
Traffic Type                        Direction  AppliedRecord                             
---------------------------------------------------------------------------------------- 
traffic-filter                      inbound    IPv4 ACL 3012                             
----------------------------------------------------------------------------------------- 
----------------------------------------------------------------------------------------- 
Traffic Type                        Direction  RemarkType  RemarkValue  AppliedRecord     
----------------------------------------------------------------------------------------- 
traffic-remark                      outbound   802.1p      2            IPv6 ACL 3011     
------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------

**Table 2** Description about the **display ap wired-port eth-trunk 0 ap-name** command output
Item	Description
Eth-trunk ID	ID of the Eth-trunk interface.
Eth-trunk description	Description of the Eth-trunk interface.
Workmode	Wired interface mode of an Eth-Trunk.
STP	Whether STP is enabled on the Eth-trunk interface.
User isolate	Whether user isolation is enabled on the Eth-trunk interface.
PVID VLAN	PVID of the Eth-trunk interface.
VLAN tagged	VLAN to which the Eth-trunk interface is added in tagged mode.
VLAN untagged	VLAN to which the Eth-trunk interface is added in untagged mode.
Traffic Type	ACL-based packet filtering and re-marking implemented by the AP wired port. traffic-filter traffic-remark
Direction	Incoming or outgoing packets.
AppliedRecord	IPv4/IPv6/L2 packet filtering and re-marking based on ACLs.
RemarkType	Protocol type. dscp dot1p
RemarkValue	Protocol type value. dscp: 0-63 dot1p: 0-7