display autosave config (upgrade-compatible command)

Function

The display autosave config command displays the configuration about the autosave function, including the status of the autosave function, time for autosave check, threshold of the CPU usage, and interval during which configurations are not changed.

Format

display autosave config

Parameters

None

Views

All views

Default Level

3: Management level

Usage Guidelines

After the autosave function is configured, you can run the display autosave config command to check whether the configured parameters are correct. You can also run this command to check whether the parameters about the autosave function are properly configured when autosave cannot function normally. If not, run the set save-configuration command to adjust the parameters to restore the normal state of the autosave function.

Example

# Display the configuration about the autosave function.

<HUAWEI> display autosave config

Auto save function status: enable
Auto save checking interval: 60 minutes
The threshold of the CPU usage: 50%
The interval of the configuration not changing: 30 minutes

**Table 1** Description of the display autosave config command output
Item	Description
Auto save function status	Indicates the status of the autosave function: Enable Disable
Auto save checking interval	Indicates the time for autosave check.
The threshold of the CPU usage	Indicates the threshold of the CPU usage during the autosave operation.
The interval of the configuration not changing	Indicates the interval during which system configurations are not changed.