The display fault-management command displays the contents of an alarm message, active alarm message, or event.
display fault-management { alarm | active-alarm | event } [ sequence-number sequence-number ]
| Parameter | Description | Value |
|---|---|---|
| alarm | Displays information about alarms. | - |
| active-alarm | Displays information about active alarms. | - |
| event | Displays information about events. | - |
| sequence-number sequence-number | Specifies the number of an alarm message, active alarm message, or event. | The value is an integer ranging from 0 to 2147483647. When the value is 0, information about all alarm messages, active messages, or events is displayed. |
This command helps you obtain the contents of all alarm messages or one alarm message on a device.
# Display the contents of active alarm messages in the system.
<HUAWEI> display fault-management active-alarm
A/B/C/D/E/F/G/H/I/J
A=Sequence, B=RootKindFlag(Independent|RootCause|nonRootCause)
C=Generating time, D=Clearing time
E=ID, F=Name, G=Level, H=State
I=Description information for locating(Para info, Reason info)
J=RootCause alarm sequence(Only for nonRootCause alarm)
1/Independent/2008-10-13 01:49:45+08:00/-/0x41932001/hwLldpEnabled/Warning/Sta
rt/OID: 1.3.6.1.4.1.2011.5.25.134.2.1 Global LLDP is enabled.
2/Independent/2008-10-13 01:50:06+08:00/-/0x41932000/lldpRemTablesChange/Warni
ng/Start/OID: 1.0.8802.1.1.2.0.0.1 Neighbor information is changed. (LldpStatsRe
mTablesInserts=1, LldpStatsRemTablesDeletes=0, LldpStatsRemTablesDrops=0, LldpSt
atsRemTablesAgeouts=0)
5/Independent/2008-10-13 02:22:52+08:00/-/0x40c12014/hwPortPhysicalEthHalfDupl
exAlarm/Minor/Start/OID 1.3.6.1.4.1.2011.5.25.129.2.5.11 The port works in half
duplex mode. (EntityPhysicalIndex=10, BaseTrapSeverity=3, BaseTrapProbableCause=
1024, BaseTrapEventType=8, EntPhysicalName=GigabitEthernet0/0/5, RelativeResourc
e=interface GigabitEthernet0/0/5)