display netconf configuration

Function

The display netconf configuration command displays the information of iMaster NCE-Campus.

Format

display netconf configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To view the information of iMaster NCE-Campus (such as the IP address), run the display netconf configuration command.

This command cannot display the information of iMaster NCE-Campus obtained through DHCP or the registration query center.

Example

# Display the information of iMaster NCE-Campus.

<HUAWEI> display netconf configuration
--------------- Configuration begin---------------
controller ip-address 10.1.1.1 port 10020
controller ip-address 192.168.2.2 port 10020 (redirected)
--------------- Configuration end-----------------

**Table 1** Description of the **display netconf configuration** command output
Item	Description
controller ip-address 10.1.1.1 port 10020	The configured IP address and port number of iMaster NCE-Campus are 10.1.1.1 and 10020 respectively. If the information is marked with redirected, the switch has been redirected from iMaster NCE-Campus with which it just registers to another iMaster NCE-Campus for management.