display default-parameter pim-ssm6

Function

The display default-parameter pim-ssm6 command displays default configurations of PIM-SM (IPv6) for SSM.

Format

display default-parameter pim-ssm6

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display default-parameter pim-ssm6 command displays default configuration of PIM-SM (IPv6) for SSM. Even if the configuration of PIM-SM (IPv6) for SSM is modified, the display default-parameter pim-ssm6 command still displays default parameter settings. This command helps you determine which parameters have been modified.

Example

# Display default configuration of PIM-SM (IPv6) for SSM.

<HUAWEI> display default-parameter pim-ssm6
  PIM6 View Default Configurations:
  ---------------------------------
  Hello-option dr-priority: 1
  Hello-option holdtime: 105 s
  Hello-option lan-delay: 500 ms
  Hello-option neighbor-tracking: disabled
  Hello-option override-interval: 2500 ms
  Holdtime assert: 180 s
  Holdtime join-prune: 210 s
  Probe-interval: 5 s
  Register-policy: disabled
  Register-suppression-timeout: 60 s
  Source-lifetime: 210 s
  Source-policy: disabled
  Ssm-policy: disabled
  Hello periodic interval: 30 s
  Join-prune periodic interval: 60 s

  Interface View Default Configurations:
  --------------------------------------
  Pim bfd: disabled
  Pim hello-option dr-priority: 1
  Pim hello-option holdtime: 105 s
  Pim hello-option lan-delay: 500 ms
  Pim hello-option neighbor-tracking: disabled
  Pim hello-option override-interval: 2500 ms
  Pim holdtime assert: 180 s
  Pim holdtime join-prune: 210 s
  Pim require-genid: disabled
  Pim silent: disabled
  Pim timer dr-switch-delay: disabled
  Pim hello periodic interval: 30 s
  Pim join-prune periodic interval: 60 s
  Pim triggered-hello-delay: 5 s
  Pim version: 2
  Pim ipsec sa: disabled
  Pim join-policy: disabled
  Pim neighbor-policy: disabled

Choose Columns...

**Table 1** Description of the **display default-parameter pim-ssm6** command output
Item	Description
PIM6 View Default Configurations	Default configurations in the PIM-IPv6 view.
Hello-option dr-priority	Priority for DR election. This parameter is configured by the hello-option dr-priority (IPv6) command.
Hello-option holdtime	Time period for the neighbor to hold the reachable state. This parameter is configured by the hello-option holdtime (IPv6) command.
Hello-option lan-delay	Delay in transmitting Prune messages at a shared network segment. This parameter is configured by the hello-option lan-delay (IPv6) command.
Hello-option neighbor-tracking	Whether neighbor tracking is enabled. This parameter is configured by the hello-option neighbor-tracking (IPv6) command.
Hello-option override-interval	Interval for sending Prune Override messages. This parameter is configured by the hello-option override-interval (IPv6) command.
Holdtime assert	Time period for holding the Assert state. This parameter is configured by the holdtime assert (IPv6) command.
Holdtime join-prune	Time period for holding the Join or Prune state. This parameter is configured by the holdtime join-prune (IPv6) command.
Probe-interval	Interval for sending Probe messages (empty Register messages) to the RP. This parameter is configured by the probe-interval (IPv6) command.
Register-policy	Whether the rule for filtering Register messages is configured. This parameter is configured by the register-policy (IPv6) command.
Register-suppression-timeout	Time period for holding the register-suppression state. This parameter is configured by the register-suppression-timeout (IPv6) command.
Source-lifetime	Timeout period of an (S, G) entry. This parameter is configured by the source-lifetime (IPv6) command.
Source-policy	Whether the rule for filtering multicast sources is configured. This parameter is configured by the source-policy (IPv6) command.
Ssm-policy	Whether the SSM group address range is set. This parameter is configured by the ssm-policy (IPv6) command.
Hello periodic interval	Interval for sending Hello messages. This parameter is configured by the timer hello (IPv6) command.
Join-prune periodic interval	Interval for sending Join/Prune messages. This parameter is configured by the timer join-prune (IPv6) command.
Interface View Default Configurations	Default configurations in the interface view.
Pim bfd	Whether the PIM BFD is enabled on the interface. This parameter is configured by the pim ipv6 bfd enable command.
Pim hello-option dr-priority	Priority for DR election on the interface. This parameter is configured by the pim ipv6 hello-option dr-priority command.
Pim hello-option holdtime	Time period for the neighbor on the interface to hold the reachable state. This parameter is configured by the pim ipv6 hello-option holdtime command.
Pim hello-option lan-delay	Delay in transmitting Prune messages at a shared network segment on the interface. This parameter is configured by the pim ipv6 hello-option lan-delay command.
Pim hello-option neighbor-tracking	Whether neighbor tracking is enabled on the interface. This parameter is configured by the pim ipv6 hello-option neighbor-tracking command.
Pim hello-option override-interval	Interval for the interface to send Prune Override messages. This parameter is configured by the pim ipv6 hello-option override-interval command.
Pim holdtime assert	Time period for the interface to hold the Assert state. This parameter is configured by the pim ipv6 holdtime assert command.
Pim holdtime join-prune	Time period for the interface to hold the Join or Prune state. This parameter is configured by the pim ipv6 holdtime join-prune command.
Pim require-genid	Whether the received Hello message is required to carry the Generation ID. This parameter is configured by the pim ipv6 require-genid command.
Pim silent	Whether PIM Silent is enabled on the interface. This parameter is configured by the pim ipv6 silent command.
Pim timer dr-switch-delay	Whether the DR switch delay is set on the interface. This parameter is configured by the pim ipv6 timer dr-switch-delay command.
Pim hello periodic interval	Interval for the interface to send Hello messages. This parameter is configured by the pim ipv6 timer hello command.
Pim join-prune periodic interval	Interval for the interface to send Join/Prune messages. This parameter is configured by the pim ipv6 timer join-prune command.
Pim triggered-hello-delay	Maximum delay for the interface to send Hello messages. This parameter is configured by the pim ipv6 triggered-hello-delay command.
Pim version	Version of PIM enabled on the interface.
Pim ipsec sa	Whether PIM IPSec is enabled on the interface. The switch does not support this function.
Pim join-policy	Whether the join-policy is configured on the interface. This parameter is configured by the pim ipv6 join-policy command.
Pim neighbor-policy	Whether the neighbor-policy is configured on the interface. This parameter is configured by the pim ipv6 neighbor-policy command.