display pim ipv6 bsr-info

Function

The display pim ipv6 bsr-info command displays the BSRs in a PIM-SM (IPv6) domain.

Format

display pim ipv6 bsr-info

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can use this command to check BSR configuration on a PIM-SM (IPv6) network.

Example

# Display information about BSR in the current PIM-SM (IPv6) domain. If the switch is configured with C-BSR, information about the elected BSR and C-BSR is displayed.

<HUAWEI> display pim ipv6 bsr-info
VPN-Instance: public net
 Elected AdminScoped BSR Count: 0
 Elected BSR Address: FC00:0:0:2004::2
     Priority: 0
     Hash mask length: 128
     State: Elected
     Scope: 5
     Uptime: 00:00:07
     Next BSR message scheduled at: 00:00:53
     C-RP Count: 0
 Candidate AdminScoped BSR Count: 0
 Candidate BSR Address: FC00:0:0:2004::2
     Priority: 0
     Hash mask length: 128
     State: Elected
     Scope: 5
     Wait to be BSR: 0

Choose Columns...

**Table 1** Description of the **display pim ipv6 bsr-info** command output
Item	Description
Elected AdminScoped BSR Count	number of elected AdminScoped BSRs.
Elected BSR Address	IPv6 address of the elected BSR.
Priority	Priority of the BSR.
Hash mask length	Mask length in the RP hash calculation.
State	Status of the BSR. Accept Preferred: No C-BSR is configured on the device and another device functions as a BSR and does not time out. Accept Any: No C-BSR is configured on the device and the current BSR times out (applicable to the situation that a BSR administrative domain is set) Candidate: A C-BSR is configured on a device and another device functions as a BSR. Pending: The device changes from the non-BSR state to the BSR state or a C-BSR is configured on the device and the current BSR times out. Elected: The device is elected as the BSR.
Scope	Scope ID of the BSR administrative domain served by a BSR. Not scoped indicates that the BSR is not an AdminScoped BSR.
Uptime	Period during which the BSR exists.
Next BSR message scheduled at	Period after which the next BSR message is sent. BSR messages are sent only when the timer maintained by the elected BSR times out.
C-RP Count	Number of RPs learned through the BSR.
Candidate AdminScoped BSR Count	Number of AdminScoped C-BSRs.
Candidate BSR Address	IPv6 Address of the C-BSR.
Wait to be BSR	Whether the current C-BSR is valid. The values are as follows: 0: The current C-BSR is valid. The current C-BSR takes part in the BSR election. 1: The current C-BSR is invalid. The current C-BSR does not take part in the BSR election. When the number of C-BSRs configured on the switch exceeds the threshold, the value is 1.