display device ac-output status

Function

The display device ac-output status command displays AC output status of the switch.

Only the S5720I-6X-PWH-SI-AC and S5735-S-I support this command.

Format

display device ac-output status

Parameters

None.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When PDs require AC power supply, check whether the AC output function has been enabled on the switch based on the device AC output status displayed using the display device ac-output status command.

Example

# Display AC output status of the Switch.

<HUAWEI> display device ac-output status
-----------------------------------------------------                                                                               
OutputLine       ConfiguredState       PowerStatus                                                                                  
-----------------------------------------------------                                                                               
 24V              Enable                On                                                                                          
-----------------------------------------------------

**Table 1** Description of the **display device ac-output status** command output
Item	Description
OutputLine	AC output line. 24V: 24 V AC output line.
ConfiguredState	AC output configuration: Enable: AC output is enabled. Disable: AC output is disabled. To enable AC output, run the set device ac-output 24v enable command.
PowerStatus	AC output power status: On: Power is being supplied. Off: No power is supplied.