display device dc-output status

Function

The display device dc-output status command displays DC output status of the switch.

Only the S5720I-10X-PWH-SI-AC supports this command.

Format

display device dc-output status

Parameters

None.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

When PDs require DC power supply, check whether the DC output function has been enabled on the switch based on the device DC output status displayed using the display device dc-output status command.

Example

# Display DC output status of the Switch.

<HUAWEI> display device dc-output status
-----------------------------------------------------                                                                               
OutputLine       ConfiguredState       PowerStatus                                                                                  
-----------------------------------------------------                                                                               
12V-line1        Enable                On                                                                                          
12V-line2        Disable               Off                                                                                         
24V              Disable               Off                                                                                         
-----------------------------------------------------

**Table 1** Description of the **display device dc-output status** command output
Item	Description
OutputLine	DC output line: 12V-line1: 12 V line 1 DC output line 12V-line2: 12 V line 2 DC output line 24V: 24 V DC output line
ConfiguredState	DC output configuration: Enable: DC output is enabled. Disable: DC output is disabled. To enable DC output, run the set device dc-output enable command.
PowerStatus	DC output power status: On: Power is being supplied. Off: No power is supplied.