display device port-speed configuration

Function

The display device port-speed configuration command displays the maximum rate of 40GE interfaces on a switch.

Only the S6730-H and S6730S-H supports this command.

Format

display device port-speed configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the maximum rate of 40GE interfaces on a switch is changed using the assign port-speed 100GE command, you can run the display device port-speed configuration command to check the maximum rate of 40GE interfaces.

Precautions

On the S6730-H24X6C (part number: 02352FSG) and S6730-H48X6C (part number: 02352FSF), the default rate of QSPF28 interfaces is 40 Gbit/s. This command can be executed only after the license file is activated.

On the S6730-H24X6C (part number: 02353GFC), S6730S-H and S6730-H48X6C (part number: 02353FWL), by default, the license has been loaded.

Example

# Display the maximum rate of 40GE interfaces on a switch.

<HUAWEI> display device port-speed configuration                                                                                
-----------------------------------                                                                                                 
 SlotId       Current       Next                                                                                                    
-----------------------------------                                                                                                 
 0            40GE          100GE                                                                                                   
 1            40GE          100GE                                                                                                   
-----------------------------------

**Table 1** Description of the **display device port-speed configuration** command output
Item	Description
Slot	Slot ID.
Current	Current maximum rate of 40GE interfaces.
Next	Maximum rate of 40GE interfaces configured using the assign port-speed 100GE command. NOTE: If a switch does not restart after the maximum rate of 40GE interfaces is changed, the Next field value will be inconsistent with the Current field value.