display device port-config-mode status

Function

The display device port-config-mode status command displays information about the card interface working mode.

Format

display device port-config-mode status [ slot slot-id ]

Parameters

Parameter	Description	Value
slot slot-id	Specifies the slot ID.	The value depends on the device configuration.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

For the S6720-C-SI series switches, you can check information about the card interface working mode using this command.

For the S6720-HI series switch, you can check information about the 100GE interface working mode using this command.

For the S5732-H24UM2CC and S5732-H48UM2CC, you can run the display device port-config-mode status command to check the interface working mode and interface split information.

Example

# Display information about the card interface working mode of the S6720-C-SI series switches.

<HUAWEI&gt; display device port-config-mode status
Slot ID  port-config-mode  status
------------------------------------
0         port-on-board        enable
1         port-on-board        disable
------------------------------------

**Table 1** Description of the **display device port-config-mode status** command output
Item	Description
Slot ID	Slot ID.
port-config-mode	Interface working mode. The value is port-on-board.
status	Whether the switch works in card interface working mode. enable: Disable the card interface working mode. The default panel interface working mode is restored. disable: Enable the card interface working mode.

# Display information about the 100GE interface working mode of the S6720-50L-HI-48S switch.

<HUAWEI&gt; display device port-config-mode status 
Slot ID  port-config-mode  status
------------------------------------
0         100g-port        enable
1         100g-port        disable
------------------------------------

**Table 2** Description of the **display device port-config-mode status** command output
Item	Description
Slot ID	Slot ID.
port-config-mode	Interface working mode. The value is 100g-port.
status	Whether the switch works in 100GE interface working mode. enable: Enable the 100GE interface working mode. disable: Disable the 100GE interface working mode. The default 10GE and 40GE interface working modes are restored.

# Display the interface working mode and interface split information on the S5732-H24UM2CC.

<HUAWEI&gt; display device port-config-mode status 
Slot ID        Port-config-mode        Split-port              Status                                                               
----------------------------------------------------------------------                                                              
0              4*25GE+4*10GE+40GE      XGigabitEthernet0/0/1   enable                                                               
                                       XGigabitEthernet0/0/2                                                                        
                                       XGigabitEthernet0/0/3                                                                        
                                       XGigabitEthernet0/0/4                                                                        
----------------------------------------------------------------------

**Table 3** Description of the **display device port-config-mode status** command output
Item	Description
Slot ID	Slot ID.
Port-config-mode	The interface working mode is 4x25GE+4x10GE+40GE mode.
Split-port	If an interface is not split, this field displays -. If an interface is split, this field displays the converted interfaces.
Status	Current status of interface split: enable: Interface split is enabled. disable: Interface split is disabled.