display event

Function

The display event command displays events on the device.

Format

display event

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To obtain the contents of events in the system, you can run the display event command.

Example

# Display events on the device.

<HUAWEI> display event
A/B/C/D/E/F/G/H/I/J                                                             
A=Sequence, B=RootKindFlag(Independent|RootCause|nonRootCause)                  
C=Generating time, D=Clearing time                                              
E=ID, F=Name, G=Level, H=State                                                  
I=Description information for locating(Para info, Reason info)                  
J=RootCause alarm sequence(Only for nonRootCause alarm)                         
                                                                                
  1/Independent/2008-10-12 22:42:28-08:00/-/0x40812000/warmStart/Warning/Start/O
ID 1.3.6.1.6.3.1.1.5.2 warmStart                                                
  2/Independent/2008-10-12 22:42:28-08:00/-/0x41132002/hgmpMemberStatusChange/Wa
rning/Start/OID:1.3.6.1.4.1.2011.6.7.1.0.3, DeviceID:0018-8201-0987, Role:17.   
  3/Independent/2008-10-16 17:50:32-08:00/-/0x41b82000/hwCfgChgNotify/Warning/St
art/OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The curr
ent change number is 2, the change loop count is 0, and the maximum number of re
cords is 4095.

**Table 1** Description of the display event command output
Item	Description
A/B/C/D/E/F/G/H/I/J	Event display format
A=Sequence	Sequence number of an event
B=RootKindFlag(Independent\|RootCause\|nonRootCause)	Flag indicating a root-cause alarm or a non-root-cause alarm (The value of this field is Independent for any event.)
C=Generating time	Time when the event is generated
D=Clearing time	Time when the event is cleared (for non-root-cause alarms only)
E=ID	Event ID
F=Name	Event name
G=Level	Event level
H=State	Event status: Start End
I=Description information for locating(Para info, Reason info)	Description of an event, including parameters of the event and the reason why the event was triggered.
J=RootCause alarm sequence(Only for nonRootCause alarm)	This parameter is valid only for alarms.