display flexible-radio status

Function

The display flexible-radio status command displays the status and switching result of the redundant radio.

Format

display flexible-radio status

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display flexible-radio status command to check the status and switching result of the redundant radio.

Example

# Display the status and switching result of the redundant radio.

<HUAWEI> display flexible-radio status
Redundancy Results: 
R: The current radio is a redundant radio that has not been switched 
S(5G): The redundant radio is switched to the 5 GHz mode 
S(monitor): The redundant radio is switched to the monitor mode 
S(off): This redundant radio is disabled 
-: This radio is not a redundant radio
Recognize time: 2019-06-11/16:59:52 DST
----------------------------------------------------------
AP ID  Name            RfID  Band ST  Redundancy Result
----------------------------------------------------------
2      9c50-ee6f-1ea0  0     2.4G on  R
3      28a6-dbc5-eae0  0     2.4G on  S(5G)
----------------------------------------------------------
Total:4

**Table 1** Description of the **display flexible-radio status** command output
Item	Description
Recognize time	Time when the redundant radio is identified. DST indicates that the daylight saving time is set through the clock daylight-saving-time command.
AP ID	AP ID.
Name	AP name.
RfID	Radio ID.
Band	Frequency band of the radio.
ST	Radio status.
Redundancy Result	Switching result of the redundant radio. R: The current radio is a redundant radio that has not been switched. S(5G): The redundant radio is switched to the 5 GHz mode. S(monitor): The redundant radio is switched to the monitor mode. S(off): This redundant radio is disabled. -: This radio is not a redundant radio.