display ipfpm mcp

Function

The display ipfpm mcp command displays the MCP configuration and status in the IP Flow Performance Measurement (FPM) system.

Format

display ipfpm mcp

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check the MCP configuration and status.

Example

# Display the MCP configuration.

<HUAWEI> display ipfpm mcp
Specification Information:
 Max Instance Number                       :128
 Max DCP Number Per Instance               :128
 Max ACH Number Per Instance               :16
 Max TLP Number Per ACH                    :16

Configuration Information:
 MCP ID                                    :10.1.1.1
 Status                                    :Active
 Protocol Port                             :65030(default)
 Current Instance Number                   :1

**Table 1** Description of the display ipfpm mcp command output
Item	Description
Specification Information	Specifications of the MCP.
Max Instance Number	Maximum number of measurement instances supported by the MCP.
Max DCP Number Per Instance	Maximum number of DCPs supported by each measurement instance on the MCP.
Max ACH Number Per Instance	Maximum number of ACHs supported by each measurement instance on the MCP.
Max TLP Number Per ACH	Maximum number of TLPs supported by ACH on the MCP.
Configuration Information	MCP configuration.
MCP ID	MCP ID. To set the MCP ID, run the mcp id command on the MCP.
Status	MCP status: Active: The MCP works properly. Deleting: The undo nqa ipfpm mcp command is being used to disable global MCP.
Protocol Port	UDP port number through which the DCP and MCP communicate with each other. To configure the UDP port number through which the DCP and MCP communicate with each other, run the protocol udp port command.
Current Instance Number	Total number of measurement instances.