display ipfpm dcp

Function

The display ipfpm dcp command displays the DCP configuration in the IP Flow Performance Measurement (FPM) system.

Format

display ipfpm dcp

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to check the DCP configuration.

Example

# Display the DCP configuration.

<HUAWEI> display ipfpm dcp

Specification Information(Main Board):
 Max Instance Number                       : 512
 Max 10s Instance Number                   : 512
 Max 1s Instance Number                    : 1
 Max TLP Number                            : 512
 Max TLP Number Per Instance               : 8

Configuration Information:
 DCP ID                                    : 10.1.1.1
 Loss-measure Flag                         : tos-bit6(default)
 Authentication Mode                       : --
 Test Instances MCP ID                     : 10.2.2.2
 Test Instances MCP Port                   : 65030(default)
 Current Instance Number                   : 1

**Table 1** Description of the display ipfpm dcp command output
Item	Description
Specification Information(Main Board)	Specification information of the main board.
Max Instance Number	Maximum number of measurement instances supported.
Max 10s Instance Number	Maximum number of measurement instances at intervals of 10s.
Max 1s Instance Number	Maximum number of measurement instances at intervals of 1s.
Max TLP Number	Maximum number of TLPs supported.
Max TLP Number Per Instance	Maximum number of TLPs supported by each measurement instance.
Configuration Information	DCP configuration.
DCP ID	DCP ID. To configure this parameter, run the dcp id command.
Loss-measure Flag	Color bit used in packet loss measurement: tos-bit3: bit 3 in the ToS field tos-bit4: bit 4 in the ToS field tos-bit5: bit 5 in the ToS field tos-bit6: bit 6 in the ToS field tos-bit7: bit 7 in the ToS field flag-bit0: bit 0 in the Flags field To configure this parameter, run the color-flag loss-measure command.
Authentication Mode	Authentication mode on the DCP: hmac-sha256: HMAC-SHA256 encrypted authentication --: non-authentication To configure the authentication mode on a DCP, run the authentication-mode command.
Test Instances MCP ID	MCP ID. To associate an MCP ID with a measurement instance of a DCP, run the mcp command.
Test Instances MCP Port	MCP Port. To configure the UDP port number through which the DCP and MCP communicate with each other, run the mcp command.
Current Instance Number	Number of measurement instances.