display iplpm configuration brief

Function

The display iplpm configuration brief command displays the brief configuration of device-level packet loss measurement (including measurement on the entire device and direct link).

Format

display iplpm configuration brief

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

To view parameters of device-level packet loss measurement, run this command.

Example

# Display the brief configuration of device-level packet loss measurement.

<HUAWEI> display iplpm configuration brief
Configuration information:
----------------------------------------------------------------
Loss-measure flag               : flags-bit0(default)
Global loss-measure interval(s) : 10(default)
Global loss-measure status      : disable
Global loss-measure alarm       : disable
Loss-measure board number       : 1
Loss-measure board list         : 0
Loss-measure port number        : 9
Loss-measure port list          : GigabitEthernet0/0/1
                                  GigabitEthernet0/0/2
                                  GigabitEthernet0/0/3
                                  GigabitEthernet0/0/4
                                  GigabitEthernet0/0/5
                                  GigabitEthernet0/0/6
                                  GigabitEthernet0/0/7
                                  GigabitEthernet0/0/8
                                  GigabitEthernet0/0/9
----------------------------------------------------------------

**Table 1** Description of the display iplpm configuration brief command output
Item	Description
Configuration information	Configuration of device-level packet loss measurement.
Loss-measure flag	Color bit for packet loss measurement. To configure the color bit, run the iplpm loss-measure color-flag command. tos-bit6: bit 6 in the ToS field tos-bit7: bit 7 in the ToS field flags-bit0: bit 0 in the Flags field The value default indicates that the default color bit is used.
Global loss-measure interval(s)	Measurement interval of packet loss measurement on the device. To set the measurement interval, run the iplpm global loss-measure interval command. The value default indicates that the default measurement interval is used.
Global loss-measure status	Whether packet loss measurement on the device is enabled. To packet loss measurement for a device, run the iplpm global loss-measure enable command. enable disable
Global loss-measure alarm	Whether the alarm and clear alarm of packet loss ratio are enabled. To enable the alarm and clear alarm of packet loss ratio, run the iplpm global loss-measure alarm enable command. enable disable
Loss-measure board number	Number of devices that support device-level packet loss measurement.
Loss-measure board list	List of slot numbers of devices that support device-level packet loss measurement. The value -- indicates that no device supports device-level packet loss measurement.
Loss-measure port number	Number of interfaces where packet loss measurement for direct links is enabled.
Loss-measure port list	List of interfaces where packet loss measurement for direct links is enabled. The value -- indicates that no interface is enabled with packet loss measurement for direct links.