display iplpm loss-measure statistics global

Function

Run the display iplpm loss-measure statistics global command displays the packet loss measurement result on a device.

Format

display iplpm loss-measure statistics global

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run this command to view the packet loss measurement result on a device, including the number of discarded packets, packet loss ratio, and error information.

Example

# Display the packet loss measurement result on a device.

<HUAWEI> display iplpm loss-measure statistics global 
Latest global loss statistics:
--------------------------------------------------------------------------------
 StartTime(DST)        Loss Packets            LossRatio         ErrorInfo      
--------------------------------------------------------------------------------
 2014-06-12 18:47:30   344127                  4.513519%         OK 
 2014-06-12 18:47:20   381085                  4.513196%         OK 
 2014-06-12 18:47:10   381192                  4.513290%         OK 
 2014-06-12 18:47:00   381339                  4.513341%         OK 
 2014-06-12 18:46:50   381465                  4.513392%         OK 
 2014-06-12 18:46:40   381444                  4.513487%         OK 
 2014-06-12 18:46:30   381129                  4.513309%         OK 
--------------------------------------------------------------------------------

**Table 1** Description of the **display iplpm loss-measure statistics global** command output
Item	Description
Latest global loss statistics	Latest statistics about packet loss measurement on the device.
StartTime(DST)	Time the packet loss measurement result was generated (standard DST), which is also the start time of each measurement interval.
Loss Packets	Number of discarded packets in the current measurement interval.
LossRatio	Packet loss ratio in the current measurement interval.
ErrorInfo	Error code about packet loss measurement in the current measurement interval: OK: There is no error, and the packet loss measurement result is normal. Incomplete: The statistics data is incomplete. The possible reason is the inter-chassis communication error. Part of statistics on the standby or slave switch cannot be sent to the master switch.