display load-balance-profile

Function

The display load-balance-profile command displays detailed information about a specified load balancing profile.

Only the S5720-EI, S5720-HI, S5730-HI, S5730S-EI, S5730-SI, S5731-H, S5731-S, S5731S-H, S5731S-S, S5732-H, S6720-EI, S6720-HI, S6720-LI, S6720S-EI, S6720S-LI, S6720S-SI, S6720-SI, S6730-H, S6730S-H, S6730-S, and S6730S-S support this command.

Format

display load-balance-profile [ profile-name ]

Parameters

Parameter	Description	Value
profile-name	Specifies the name of a load balancing profile.	The value is a string of 1 to 31 characters.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command displays detailed information about a specified load balancing profile, including the load balancing mode of IPv4, IPv6, Layer 2, and MPLS packets.

Example

# Display detailed information about a specified load balancing profile.

<HUAWEI> display load-balance-profile abc
Load-balance-profile : abc
Packet    HashField
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
IPV4      sip         dip
IPV6      sip         dip
L2        smac        l2-protocol vlan        sport
MPLS      top-label   2nd-label

Trunk interface
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Eth-Trunk100

**Table 1** Description of the display load-balance-profile command output
Item	Description
Load-balance-profile	Load balancing profile. To specify the parameter, run the load-balance-profile command.
Packet	Packet type.
HashField	Load balancing mode in the load balancing profile. You can run the ipv4 field, ipv6 field, l2 field, and mpls field commands to configure the load balancing mode for IPv4, IPv6, Layer 2, and MPLS packets respectively.
Trunk interface	Eth-Trunk that uses the load balancing profile, configured by the load-balance command.