display mesh-handover-profile

Function

The display mesh-handover-profile command displays reference or configuration information about a Mesh handover profile.

Format

display mesh-handover-profile { all | name profile-name }

Parameters

Parameter	Description	Value
all	Displays reference information about all Mesh handover profiles.	-
name profile-name	Displays information about a specified Mesh handover profile.	The Mesh handover profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display mesh-handover-profile command to view the number of times a Mesh handover profile is referenced by a Mesh profile or parameter settings of a specified Mesh handover profile.

Example

# Display reference information about all Mesh handover profiles.

<HUAWEI> display mesh-handover-profile all
--------------------------------------------------------------------------------
Profile name                         Reference                                  
--------------------------------------------------------------------------------
default                              0                                          
test                                 2                                          
--------------------------------------------------------------------------------
Total: 2

**Table 1** Description of the **display mesh-handover-profile all** command output
Item	Description
Profile name	Name of a Mesh handover profile. To configure this parameter, run the mesh-handover-profile command.
Reference	Number of times a Mesh handover profile is referenced by a Mesh profile.

# Display information about the Mesh handover profile test.

<HUAWEI> display mesh-handover-profile name test
--------------------------------------------------------------------------------
Handover location based algorithm switch            : disable                    
Handover probe interval(ms)                         : 100                    
--------------------------------------------------------------------------------

**Table 2** Description of the **display mesh-handover-profile name** command output
Item	Description
Handover location based algorithm switch	Status of the location-based enhanced fast link handover algorithm. disable: The algorithm is disabled. enable: The algorithm is enabled. To configure this parameter, run the location-based-algorithm enable command.
Handover probe interval	Mesh link probe interval. To configure the parameter, run the link-probe-interval command.