The display mpls rsvp-te psb-content command displays information about an RSVP TE Path State Block (PSB).
| Parameter | Description | Value |
|---|---|---|
| ingress-lsr-id | Specifies the LSR ID of the ingress. | The value is in dotted decimal notation. |
| tunnel-id | Specifies the tunnel ID. | The value is an integer that ranges from 0 to 65535. |
| lsp-id | Specifies the LSP ID. | The value is an integer that ranges from 0 to 65535. |
# Display information about the PSB.
<HUAWEI> display mpls rsvp-te psb-content 10.1.1.9 100 7 ============================================================== The PSB Content ============================================================== Tunnel Addr: 10.4.4.9 Exist time: 17h 12m 57s Tunnel ExtID: 10.1.1.9 Session ID: 100 Ingress LSR ID: 10.1.1.9 Local LSP ID: 7 Previous Hop : 172.16.1.1/0x2d Next Hop : 172.20.1.2 Incoming / Outgoing Interface: Vlanif100 / Vlanif20 InLabel : 1028 OutLabel : 1028 Send Message ID : 30 Recv Message ID : 0 Refresh Timer : 510224684 Cleanup Timer : 408260940 Session Attribute- SetupPrio: 7 HoldPrio: 7 SessionAttrib: Local Protect desired. Node Protect desired. Label Recording de sired. SE Style desired. LSP Type: - FRR Flag : Will be MP Local RRO Flag : 0x1 ERO Information- L-Type ERO-IPAddr ERO-PrefixLen ERHOP_STRICT 172.20.1.2 32 ERHOP_STRICT 172.30.1.1 32 ERHOP_STRICT 172.30.1.2 32 Bypass ERO Information- L-Type ERO-IPAddr ERO-PrefixLen ERHOP_STRICT 10.3.3.9 32 ERHOP_STRICT 172.30.1.1 32 ERHOP_STRICT 172.30.1.2 32 RRO Information- RRO-CType: IPV4 IPAddress: 172.16.1.1 PrefixLen: 32 Flag: 0x9 RRO-CType: IPV4 IPAddress: 10.1.1.9 PrefixLen: 32 Flag: 0x20 SenderTspec Information- Token bucket rate: 0.00 Token bucket size: 1000.00 Peak data rate: 0.00 Minimum policed unit: 0 Maximum packet size: 1500 Path Message arrive on Vlanif100 from PHOP 172.16.1.1 Path Message sent to NHOP 172.20.1.2 on Vlanif20 Resource Reservation OK LSP Statistics Information: SendPacketCounter: 3623 RecvPacketCounter: 3648 SendPathCounter: 1794 RecvPathCounter: 1791 SendResvCounter: 1829 RecvResvCounter: 1857
Item |
Description |
|---|---|
Tunnel Addr |
Tunnel address in the format X.X.X.X. |
Exist time |
Duration that an LSP has been established. |
Tunnel ExtID |
Tunnel extended ID. |
Session ID |
RSVP session ID |
Ingress LSR ID |
Ingress address in the format X.X.X.X. |
Local LSP ID |
Local LSP ID. |
Previous Hop |
Previous-hop address in the format X.X.X.X. |
Next Hop |
Next-hop address in the format X.X.X.X. |
Incoming / Outgoing Interface |
Incoming or outgoing interface through which a tunnel passes on the local device. |
InLabel |
Value of an incoming label. |
OutLabel |
Value of an outgoing label. |
Send Message ID |
ID of the sent refresh reduction message. |
Recv Message ID |
ID of the received refresh reduction message. |
Refresh Timer |
Refresh timer. |
Cleanup Timer |
Timeout timer. |
Session Attribute |
Attribute of an RSVP session. |
SetupPrio |
Setup priority of an RSVP session. |
HoldPrio |
Holding priority of an RSVP session. |
SessionAttrib |
RSVP session attributes, such as resource reservation style. |
LSP Type |
Type of LSP. |
FRR Flag |
State of MPLS TE FRR |
Local RRO Flag |
Flag bit of the local RRO. |
ERO Information |
Information about the Explicit Route Object (ERO). |
L-Type |
Types of the explicit route. |
ERO-IPAddr |
Explicit route address. |
ERO-PrefixLen |
Explicit route prefix length. |
RRO Information |
Information about the Record Route Object (RRO). |
RRO-CType |
RRO of the C type, IPv4 or label. |
IPAddress |
IP address of a record route. |
PrefixLen |
Prefix length of a recorded route. |
Flag |
Flag bit of a recorded route. |
SenderTspec Information |
Information about the traffic specification of the sender. |
Token bucket rate |
Token bucket rate, in byte/s. |
Token bucket size |
Token bucket size. |
Peak data rate |
Peak data rate, in byte/s. |
Minimum policed unit |
Minimum policed unit. |
Maximum packet size |
Maximum packet size. |
Path Message arrive on |
Incoming interfaces and previous-hop addresses of messages. |
Path Message sent to NHOP |
Next-hop addresses and outgoing interfaces of messages. |
Resource Reservation OK |
Ready state of resource reservation that is displayed only when the resource reserved flag is set. |
LSP Statistics Information |
Statistics of LSPs. |
SendPacketCounter |
Number of sent packets. |
RecvPacketCounter |
Number of received packets. |
SendPathCounter |
Number of sent Path messages. |
RecvPathCounter |
Number of received Path messages. |
SendResvCounter |
Number of sent Resv messages. |
RecvResvCounter |
Number of received Resv messages. |