display mpls rsvp-te request

Function

The display mpls rsvp-te request command displays information about the RSVP-TE request messages on interfaces.

Format

display mpls rsvp-te request [ interface interface-type interface-number peer-ip-address ]

Parameters

Parameter	Description	Value
interface interface-type interface-number	Displays information about RSVP TE request messages on a specified interface. interface-type specifies the interface type. interface-number specifies the interface number.	-
peer-ip-address	Specifies the IP address of a neighbor device.	The value is in dotted decimal notation.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

If no interface name is specified, the command displays information about the RSVP-TE request information of all RSVP-TE-enabled interfaces.

Example

# Display information about RSVP-TE of a specified interface.

<HUAWEI> display mpls rsvp-te request interface vlanif 10 172.16.1.1
Interface: Vlanif10
 Tunnel Addr: 10.2.2.9               Ingress LSR ID: 10.1.1.9
 Local LSP ID: 0                     Session Tunnel ID: 100
 NextHopAddr:  -----
 SessionAttrib: Label Recording desired. SE Style desired.
 Token bucket rate: 0.00             Token bucket size: 1000.00
 Out Interface:  -----

**Table 1** Description of the display mpls rsvp-te request command output
Item	Description
Interface	Name of the interface that is enabled with RSVP-TE.
Tunnel Addr	Tunnel destination address in the format X.X.X.X.
Ingress LSR ID	LSR ID of the ingress node in the format X.X.X.X.
Local LSP ID	Local identifier of an LSP.
Session Tunnel ID	Tunnel ID
NextHopAddr	Next-hop address in the format X.X.X.X.
SessionAttrib	Session attribute: Local protection desired Label record desired Resource reservation style
Token bucket rate	Token bucket rate.
Token bucket size	Token bucket size.
Out Interface	Outgoing interface of an LSP.