display power manage power-information

Function

The display power manage power-information command displays the power consumption information of a device.

Format

display power manage power-information

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display power manage power-information command enables you to check the system power consumption information, including the accumulative power consumption, average power, real-time power, rated power, and power threshold of the device.

Example

# Display the system power consumption information.

<HUAWEI> display power manage power-information
The information of net element power:
 --------------------------------------------------
 The total power consumption (Joule) : 1000
 The average power consumption (mW)  : 20000
 The current power consumption (mW)  : 20000
 The rated power (mW)                : 433000
 The threshold of power (mW)         : 433000
 --------------------------------------------------

**Table 1** Description of the display power manage power-information command output
Item	Description
The information of net element power	System power consumption information.
The total power consumption (Joule)	Accumulative power consumption, in Joule. This field displays NA when the device type is S2720-EI, S5720I-SI, S5720-LI, S5720S-LI, S5720S-SI, S5735-L, S5735S-L, S5735S-L-M, S5735-S, S5735S-S, S5735-S-I, and S5720-SI. This field displays NA when the device uses the PAC60S12-AR or PAC150S12-R power module of which power information cannot be obtained. NOTE: The accumulative power consumption is stored in the device memory and will not be lost when the device is powered off. When the device is running, power consumption is accumulated once every 15 minutes. The accumulated power consumption and accumulative power consumption in the memory are added and recorded in the memory once every 24 hours. If there is no accumulative power consumption in the memory, this field displays 0. If the device is powered off within 24 hours after starting, the power consumption accumulated within 24 hours is not added to the accumulative power consumption in the memory.
The average power consumption (mW)	Average power of the system, in mW. This field displays NA when the device type is S2720-EI, S5720I-SI, S5720-LI, S5720S-LI, S5720S-SI, S5735-L, S5735S-L, S5735S-L-M, S5735-S, S5735S-S, S5735-S-I, and S5720-SI. This field displays NA when the device uses the PAC60S12-AR or PAC150S12-R power module of which power information cannot be obtained.
The current power consumption (mW)	Real-time power of the system, in mW. This field displays NA when the device type is S2720-EI, S5720I-SI, S5720-LI, S5720S-LI, S5720S-SI, S5735-L, S5735S-L, S5735S-L-M, S5735-S, S5735S-S, S5735-S-I, and S5720-SI. This field displays NA when the device uses the PAC60S12-AR or PAC150S12-R power module of which power information cannot be obtained.
The rated power (mW)	Rated power of the system, in mW.
The threshold of power (mW)	Power threshold of the power supply unit, in mW. The value is the rated power of the power supply unit used on the device. When there are two power supply units on the device, they work in redundancy mode to supply power to the system. The supplied power is not the accumulated power of the two power supply units. When the rated power of both power supply units can be obtained, this field displays the smaller rated power. If the rated power of one power supply unit cannot be obtained, this field displays the obtained rated power. If the rated power of both power supply units cannot be obtained, this field displays the system rated power. If a built-in power supply is used, the value is the rated power of the system.