display power manage sleep configuration

Function

The display power manage sleep configuration command displays device dormancy information.

Only the S5720-28P-SI-AC, S5720-28X-SI-AC, S5720-28X-SI-DC, S5720-52P-SI-AC, S5720-52X-SI-DC, and S5720-52X-SI-AC in the S5720-SI series, and the S5735-S, S5735-S-I, S5735S-S, S5735-L, S5735S-L, S5735S-L-M, and S5720S-SI series switches support the sleep mode.

Format

display power manage sleep configuration

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

The display power manage sleep configuration command shows device dormancy information, including the time range, period during which the awakening port status is detected continuously, awakening mode, and non-awakening ports.

Example

# Display the device dormancy configuration.

<HUAWEI> display power manage sleep configuration
The device sleep function status: enable                                         
The device sleep time-range: night-time                                     
-----------------------------------------------                                 
Current time is 16:19:45 5-14-2012 Monday                                       
                                                                                
Time-range: night-time ( Inactive )                                             
20:00 to 00:00 working-day                                                      
00:00 to 08:00 working-day                                                      
-----------------------------------------------                                 
The awaken port state check interval (minutes): 20(default)                      
The configuration of non-awaken port:                                           
-----------------------------------------------                                 
 GigabitEthernet0/0/1     GigabitEthernet0/0/2                                  
 GigabitEthernet0/0/3     GigabitEthernet0/0/4                                  
 GigabitEthernet0/0/5     GigabitEthernet0/0/6                                  
 GigabitEthernet0/0/7     GigabitEthernet0/0/8                                  
 GigabitEthernet0/0/9     GigabitEthernet0/0/10                                 
-----------------------------------------------

**Table 1** Description of the display power manage sleep configuration command output
Item	Description
The device sleep function status	Device dormancy mode. disable: The device dormancy function is disabled. That is, the device energy-saving mode configured using the set power manage mode command is not 4. enable: The device dormancy function is enabled. That is, the device energy-saving mode configured using the set power manage mode command is 4.
The device sleep time-range	Dormancy time range name. If no dormancy time range is specified, the whole day takes effect by default. To set a dormancy time range, run the sleep time-range command.
Time-range	Dormancy time range. If the field value contains ( Inactive ), the current time is not within the dormancy time range. If the field value contains ( Active ), the current time is within the dormancy time range.
The awaken port state check interval (minutes)	Period during which the awakening port status is detected continuously. To set the period, run the set power manage interval command.
The configuration of non-awaken port	Configured non-awakening ports. To configure non-awakening ports, run the set power manage non-awaken-port command.