display service-security policy

Function

The display service-security policy command displays MPAC policy configurations.

Format

display service-security policy { ipv4 | ipv6 } [ security-policy-name ]

Parameters

Parameter	Description	Value
ipv4	Displays the specified IPv4 MPAC policy.	-
ipv6	Displays the specified IPv6 MPAC policy.	-
security-policy-name	Specifies the name of an MPAC policy to be displayed.	The value is a string of 1 to 31 case-sensitive characters without spaces. It must start with a letter.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

An MPAC policy protects device security by controlling the packets destined for the CPUs.

To check the MPAC rules, step, and description configured on a device, run the display service-security policy command.

Example

# Display all IPv4 MPAC policy configurations on a device.

<HUAWEI> display service-security policy ipv4

Policy Name : A1                                                                
Step        : 5                                                                 
                                                                                
Policy Name : huawei                                                            
Description : RouterA-GE1/0/1 to ROUTERB-GE1/0/1                                
Step        : 5                                                                 
 rule 5 permit protocol udp source-port 3503

# Display the configuration of the IPv4 MPAC policy huawei.

<HUAWEI> display service-security policy ipv4 huawei

Policy Name : huawei
Step        : 5
 rule 5 permit protocol tcp source-ip 127.1.1.1 0 source-port 1000
 rule 10 permit protocol ip source-ip 10.10.1.0 0.0.0.255

**Table 1** Description of the display service-security policy command output
Item	Description
Policy Name	Name of an MPAC policy.
Description	Description of an MPAC policy.
Step	Step between two MPAC rule IDs.
rule	MPAC rules.