display snmp-agent trap feature-name gtl all

Function

The display snmp-agent trap feature-name gtl all command displays all trap messages of the GTL module.

This command takes effect only on the device that loads the license control item.

Format

display snmp-agent trap feature-name gtl all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display snmp-agent trap feature-name gtl all command to check status of all GTL traps. This status can be configured using the snmp-agent trap enable feature-name gtl command.

Example

# Display all trap messages of the GTL module.

<HUAWEI> display snmp-agent trap feature-name gtl all
------------------------------------------------------------------------------
Feature name: GTL
Trap number : 8
------------------------------------------------------------------------------
Trap name                       Default switch status   Current switch status
hwGtlResourceUsedUp             on                      on
hwGtlNearDeadline               on                      on
hwGtlDefaultValue               off                     on
hwGtlResourceUsedUpCleared      on                      on
hwGtlNearDeadlineCleared        on                      on
hwGtlDefaultValueCleared        off                     on
hwGtlEsnMismatch                on                      on
hwGtlEsnMismatchCleared         on                      on

**Table 1** Description of the **display snmp-agent trap feature-name gtl all** command output
Item	Description
Feature name	Name of the module to which a trap message belongs.
Trap number	Number of trap messages.
Trap name	Name of a trap message of the GTL module: hwGtlResourceUsedUp: The trap was generated when the percentage of the resources used by the service module was not less than the threshold defined by the license. hwGtlNearDeadline: The trap was generated when the system date was approaching the deadline of the service module defined in the license, that is, when the license entered the demo status. hwGtlDefaultValue: The system used the default configuration of the license, when a license file became invalid. hwGtlResourceUsedUpCleared: The trap was generated when the resource usage of the service module fell below the threshold. hwGtlNearDeadlineCleared: The trap was generated when the old license file became invalid or the new license file took effect. hwGtlDefaultValueCleared: The trap was generated when the system did not use default license configurations. hwGtlEsnMismatch: The trap was generated when the device ESN and the license ESN did not match. hwGtlEsnMismatchCleared: The trap was generated when the device ESN and the license ESN matched again.
Default switch status	Status of the default trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.
Current switch status	Status of the current trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.