display snmp-agent trap feature-name sspadp all

Function

The display snmp-agent trap feature-name sspadp all command displays the status of all traps on the SSPADP module.

Format

display snmp-agent trap feature-name sspadp all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After enabling the trap function for the SSPADP module, you can run the display snmp-agent trap feature-name sspadp all command to check the status of all traps on the SSPADP module. To enable the trap function for the SSPADP module, run the snmp-agent trap enable feature-name sspadp command.

Prerequisites

The SNMP function has been enabled on the switch. For details, see snmp-agent.

Example

# Display the status of all traps on the SSPADP module.

<HUAWEI>display snmp-agent trap feature-name sspadp all
------------------------------------------------------------------------------
Feature name: SSPADP
Trap number : 1
------------------------------------------------------------------------------
Trap name                       Default switch status   Current switch status
hwPatchDelNeedReStartTrap       on                      on

**Table 1** Description of the **display snmp-agent trap feature-name sspadp all** command output
Item	Specification
Feature name	Name of the module that the trap belongs to.
Trap number	Number of traps.
Trap name	Name of a trap. hwPatchDelNeedReStartTrap: The switch needs to be restarted after the patch is deleted.
Default switch status	Default status of the trap function: on: indicates that the trap function is enabled by default. off: indicates that the trap function is disabled by default.
Current switch status	Status of the trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.