display snmp-agent trap feature-name ipfpm all

Function

The display snmp-agent trap feature-name ipfpm all command displays whether the switch is enabled to send traps of IP Flow Performance Measurement (IP FPM) module to the NMS.

Format

display snmp-agent trap feature-name ipfpm all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After running the snmp-agent trap enable feature-name ipfpm command to enable the function of sending traps of IP FPM modules to the NMS, you can run the display snmp-agent trap feature-name ipfpm all command to check whether this function is enabled.

Prerequisites

SNMP has been enabled. For details, see snmp-agent.

Example

# Display whether the switch is enabled to send traps of IP FPM module to the NMS.

<HUAWEI> display snmp-agent trap feature-name ipfpm all
------------------------------------------------------------------------------  
Feature name: IPFPM                                                             
Trap number : 4                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
hwIpfpmLossRatioExceed          off                     on                      
hwIpfpmLossRatioRecovery        off                     on                      
hwIpfpmTlpExceed                off                     on                      
hwIpfpmTlpRecovery              off                     on

**Table 1** Description of the **display snmp-agent trap feature-name ipfpm all** command output
Item	Description
Feature name	Name of the feature that generates traps.
Trap number	Number of traps generated by IP FPM module.
Trap name	Name of the trap. Traps of the IP FPM module include: hwIpfpmLossRatioExceed: The packet loss ratio exceeds the threshold. hwIpfpmLossRatioRecovery: The default packet loss ratio is restored. hwIpfpmTlpExceed: The number of TLPs exceeds the limit. hwIpfpmTlpRecovery: The default number of TLPs is restored.
Default switch status	Default status of a trap: on: The switch is enabled to send this trap to the NMS. off: The switch is disabled to send this trap to the NMS.
Current switch status	Current status of a trap: on: The switch is enabled to send this trap to the NMS. off: The switch is disabled to send this trap to the NMS. This status can be configured using the snmp-agent trap enable feature-name ipfpm command.