display snmp-agent trap feature-name iplpm all

Function

The display snmp-agent trap feature-name iplpm all command displays whether the switch is enabled to send traps of IP Local Performance Measurement (IP LPM) module to the NMS.

Format

display snmp-agent trap feature-name iplpm all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After running the snmp-agent trap enable feature-name iplpm command to enable the function of sending traps of IP LPM modules to the NMS, you can run the display snmp-agent trap feature-name iplpm all command to check whether this function is enabled.

Prerequisites

SNMP has been enabled. For details, see snmp-agent.

Example

# Display whether the switch is enabled to send traps of IP LPM module to the NMS.

<HUAWEI> display snmp-agent trap feature-name iplpm all
------------------------------------------------------------------------------
Feature name: iplpm                                                           
Trap number : 4                                                               
------------------------------------------------------------------------------
Trap name                       Default switch status   Current switch status 
hwIplpmGlobalLossRatioExceed    on                      on                    
hwIplpmGlobalLossRatioRecovery  on                      on                    
hwIplpmLinkForwardLossRatioExceed                                             
                                on                      on                    
hwIplpmLinkForwardLossRatioRecovery                                           
                                on                      on

**Table 1** Description of the **display snmp-agent trap feature-name iplpm all** command output
Item	Description
Feature name	Name of the feature that generates traps.
Trap number	Number of traps generated by IP LPM module.
Trap name	Name of the trap. Traps of the IP LPM module include: hwIplpmGlobalLossRatioExceed: The packet loss ratio of the entire device exceeds the upper limit. hwIplpmGlobalLossRatioRecovery: The packet loss ratio of the entire device falls below the upper limit. hwIplpmLinkForwardLossRatioExceed: The packet loss ratio of the link between directly connected devices exceeds the upper limit. hwIplpmLinkForwardLossRatioRecovery: The packet loss ratio of the link between directly connected devices falls below the upper limit.
Default switch status	Default status of a trap: on: The switch is enabled to send this trap to the NMS. off: The switch is disabled to send this trap to the NMS.
Current switch status	Current status of a trap: on: The switch is enabled to send this trap to the NMS. off: The switch is disabled to send this trap to the NMS. This status can be configured using the snmp-agent trap enable feature-name iplpm command.