display snmp-agent trap feature-name sindex all

Function

The display snmp-agent trap feature-name sindex all command displays the status of all traps on the SINDEX module.

Format

display snmp-agent trap feature-name sindex all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display snmp-agent trap feature-name sindex all command to check the status of all traps on the SINDEX module. This status can be configured using the snmp-agent trap enable feature-name sindex command.

Example

# Display the status of all traps on the SINDEX module.

<HUAWEI> display snmp-agent trap feature-name sindex all

------------------------------------------------------------------------------  
Feature name: SINDEX                                                            
Trap number : 1                                                                 
------------------------------------------------------------------------------  
Trap name                       Default switch status   Current switch status   
hwNetStreamIndexUsedUp          on                      on

**Table 1** Description of the display snmp-agent trap feature-name sindex all command output
Item	Description
Feature name	Name of the module that a trap message belongs.
Trap number	Number of trap messages.
Trap name	Name of a trap.
Default switch status	Default status of a trap: on: The trap is enabled. off: The trap is disabled.
Current switch status	Status of a trap: on: The trap is enabled. off: The trap is disabled. This status can be configured using the snmp-agent trap enable feature-name sindex command.
hwNetStreamIndexUsedUp	The NetStream interface indexes are all allocated.