The enable command enables the aggregation function in the aggregation view.
The undo enable command disables the aggregation function in the aggregation view.
By default, the aggregation
function is disabled.
Format
enable
undo enable
Parameters
None
Views
NetStream aggregation view
Default Level
3: Management level
Usage Guidelines
The enable command takes effect only in the NetStream aggregation view. Flow statistics are exported according to the configured aggregation method only after you run the enable command in the aggregation
view.
Example
# Enable destination address prefix aggregation.
<HUAWEI> system-view
[HUAWEI] ip netstream aggregation destination-prefix
[HUAWEI-aggregation-dstpre] enable