display snmp-agent trap feature-name swithsrvres all

Function

display snmp-agent trap feature-name swithsrvres all command displays the status of all traps on the SWITHSRVRES module.

Format

display snmp-agent trap feature-name swithsrvres all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the trap function of a specified feature is enabled, you can run the display snmp-agent trap feature-name swithsrvres all command to check the status of all traps of SWITHSRVRES. You can use the snmp-agent trap enable feature-name swithsrvres command to enable the trap function of SWITHSRVRES.

Prerequisites

SNMP has been enabled. For details, see snmp-agent.

Example

# Display all the traps of the SWITHSRVRES module.

<HUAWEI>display snmp-agent trap feature-name swithsrvres all

------------------------------------------------------------------------------                                                      
Feature name: SWITHSRVRES                                                                                                           
Trap number : 3                                                                                                                     
------------------------------------------------------------------------------                                                      
Trap name                       Default switch status   Current switch status                                                       
hwSrvServiceExceedThreshould    on                      on                                                                          
hwSrvServiceExceedThreshouldResume                                                                                                  
                                on                      on                                                                          
hwSrvServiceConfigFailed        on                      on

**Table 1** Description of the display snmp-agent trap feature-name swithsrvres all command output
Item	Specification
Feature name	Name of the module that the trap belongs to.
Trap number	Number of traps.
Trap name	Trap name. Traps of the SWITHSRVRES module include: hwSrvServiceExceedThreshould: The service configurations exceed the recommended threshold. hwSrvServiceExceedThreshouldResume: The service configurations fall below the recommended threshold. hwSrvServiceConfigFailed: The service configurations fail.
Default switch status	Default status of the trap function: on: indicates that the trap function is enabled by default. off: indicates that the trap function is disabled by default.
Current switch status	Status of the trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.