display snmp-agent trap feature-name sysres all

Function

The display snmp-agent trap feature-name sysres all command displays the status of all the traps of the SYSRES module.

Format

display snmp-agent trap feature-name sysres all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display snmp-agent trap feature-name sysres all command to check status of all SYSRES traps. This status can be configured using the snmp-agent trap enable feature-name sysres command.

Example

# Display the status of all the traps of the SYSRES module.

<HUAWEI> display snmp-agent trap feature-name sysres all
------------------------------------------------------------------------------                                                      
Feature name: SYSRES                                                                                                                
Trap number : 4                                                                                                                     
------------------------------------------------------------------------------                                                      
Trap name                       Default switch status   Current switch status                                                       
hwSysResourceExceed             on                      on                                                                          
hwSysResourceExceedResume       on                      on                                                                          
hwSysResourceThresholdExceed    on                      on                                                                          
hwSysResourceThresholdExceedResume                                                                                                  
                                on                      on

**Table 1** Description of the display snmp-agent trap feature-name sysres all command output
Item	Description
Feature name	Name of the module where the trap is generated.
Trap number	Number of traps.
Trap name	Name of a trap.
Default switch status	Default status of a trap: on: The trap function is enabled. off: The trap function is disabled.
Current switch status	Current status of a trap: on: The trap function is enabled. off: The trap function is disabled. This status can be configured using the snmp-agent trap enable feature-name sysres command.