display snmp-agent trap feature-name uni-topomng all

Function

display snmp-agent trap feature-name uni-topomng all command displays the status of all traps on the UNI-TOPOMNG module.

This command can only be executed on a parent switch.

Format

display snmp-agent trap feature-name uni-topomng all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the trap function of a specified feature is enabled, you can run the display snmp-agent trap feature-name uni-topomng all command to check the status of all traps of UNI-TOPOMNG. You can use the snmp-agent trap enable feature-name uni-topomng command to enable the trap function of UNI-TOPOMNG.

Prerequisites

SNMP has been enabled. For details, see snmp-agent.

Example

# Display all the traps of the UNI-TOPOMNG module.

<HUAWEI>display snmp-agent trap feature-name uni-topomng all

------------------------------------------------------------------------------                                                      
Feature name: uni-topomng                                                                                                           
Trap number : 2                                                                                                                     
------------------------------------------------------------------------------                                                      
Trap name                       Default switch status   Current switch status                                                       
hwTopomngLinkNormal             on                      on                                                                          
hwTopomngLinkAbnormal           on                      on

**Table 1** Description of the display snmp-agent trap feature-name uni-topomng all command output
Item	Specification
Feature name	Name of the module that the trap belongs to.
Trap number	Number of traps.
Trap name	Trap name. Traps of the UNI-TOPOMNG module include: hwTopomngLinkNormal: The connection status becomes normal. hwTopomngLinkAbnormal: A connection fault occurs.
Default switch status	Default status of the trap function: on: indicates that the trap function is enabled by default. off: indicates that the trap function is disabled by default.
Current switch status	Status of the trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.