display snmp-agent trap feature-name unimbrtrap all command displays the status of all traps on the UNIMBRTRAP module.
This command can only be executed on a parent switch.
Usage Scenario
After the trap function of a specified feature is enabled, you can run the display snmp-agent trap feature-name unimbrtrap all command to check the status of all traps of UNIMBRTRAP. You can use the snmp-agent trap enable feature-name unimbrtrap command to enable the trap function of UNIMBRTRAP.
Prerequisites
SNMP has been enabled. For details, see snmp-agent.
# Display all the traps of the UNIMBRTRAP module.
<HUAWEI>display snmp-agent trap feature-name unimbrtrap all
------------------------------------------------------------------------------ Feature name: UNIMBRTRAP Trap number : 30 ------------------------------------------------------------------------------ Trap name Default switch status Current switch status hwASBrdTempAlarm on on hwASBrdTempResume on on hwASBoardFail on on hwASBoardFailResume on on hwASBoardInvalid on on hwASBoardInvalidResume on on hwASOpticalInvalid on on hwASOpticalInvalidResum on on hwASPowerRemove on on hwASPowerInsert on on hwASPowerInvalid on on hwASPowerInvalidResum on on hwASFanRemove on on hwASFanInsert on on hwASFanInvalid on on hwASFanInvalidResume on on hwASCommunicateError on on hwASCommunicateResume on on hwASCPUUtilizationRising on on hwASCPUUtilizationResume on on hwASMemUtilizationRising on on hwASMemUtilizationResume on on hwASMadConflictDetect on on hwASMadConflictResume on on hwUniMbrLinkStateChange on on hwUniMbrASDiscoverAttack on on hwUniMbrConnectError on on hwUniMbrIllegalFabricConfig on on hwUniMbrFabricPortMemberDelete on on hwUniMbrAsServiceAbnormal on on
Item |
Specification |
---|---|
Feature name |
Name of the module that the trap belongs to. |
Trap number |
Number of traps. |
Trap name |
Trap name. Traps of the UNIMBRTRAP module include:
|
Default switch status |
Default status of the trap function:
|
Current switch status |
Status of the trap function:
|