display snmp-agent trap feature-name wlan all

Function

The display snmp-agent trap feature-name wlan all command displays the status of all traps on the WLAN module.

Format

display snmp-agent trap feature-name wlan all

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

Usage Scenario

After the trap function of a specified feature is enabled, you can run the display snmp-agent trap feature-name wlan all command to check the status of all traps of WLAN. You can use the snmp-agent trap enable feature-name wlan command to enable the trap function of WLAN.

Prerequisites

SNMP has been enabled. See snmp-agent.

Example

# Display all the traps of the WLAN module.

<HUAWEI>display snmp-agent trap feature-name wlan all
------------------------------------------------------------------------------
Feature name: WLAN
Trap number : 121
------------------------------------------------------------------------------
Trap name                       Default switch status   Current switch status
hwApFaultNotify                 on                      on
hwApNormalNotify                on                      on
hwApTypeNotMatchNotify          on                      on
hwApPingResultNotify            on                      on
hwApUpdateBeginNotify           on                      on
......
hwApVersionMismatchNotify       on                      on

**Table 1** Description of the display snmp-agent trap feature-name wlan all command output
Item	Specification
Feature name	Name of the module that the trap belongs to.
Trap number	Number of traps.
Trap name	Name of traps.
Default switch status	Default status of the trap function: on: indicates that the trap function is enabled by default. off: indicates that the trap function is disabled by default.
Current switch status	Status of the trap function: on: indicates that the trap function is enabled. off: indicates that the trap function is disabled.