display wired-port-profile

Function

The display wired-port-profile command displays reference and configuration information about an AP wired port profile.

Format

display wired-port-profile { all | name profile-name }

Parameters

Parameter	Description	Value
all	Displays information about all AP wired port profiles.	-
name profile-name	Displays information about a specified AP wired port profile.	The AP wired port profile must exist.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

You can run the display wired-port-profile command to view configuration and reference information about an AP wired port profile.

Example

# Display information about all AP wired port profiles.

<HUAWEI> display wired-port-profile all
----------------------------------------------------------
Profile name                   Reference
----------------------------------------------------------
default                        1
wired-port-profile-1           0
----------------------------------------------------------
Total: 2

**Table 1** Description of the **display wired-port-profile all** command output
Item	Description
Profile name	Name of an AP wired port profile.
Reference	Number of times an AP wired port profile is referenced.

# Display information about the AP wired port profile default (Eth-trunk is not configured).

<HUAWEI> display wired-port-profile name default
----------------------------------------------------------------------------
Port link profile                              : default
Description                                    :
STP                                            : disable
Port work mode                                 : -
Port Tagged VLAN                               : -
Port untagged VLAN                             : 1
Port PVID VLAN                                 : -
User isolate mode                              : disable
DHCP trust port                                : enable
ND trust port                                  : enable
IPSG switch                                    : disable
DAI switch                                     : disable
STP auto shutdown switch                       : disable
Auto shutdown recovery time                    : 600
Learn client IPv4 address switch               : disable
Learn client IPv6 address switch               : disable
IGMP-Snooping switch                           : disable
MLD-Snooping switch                            : disable
Port security switch                           : disable
Port security sticky MAC                       : disable
Port security maximum MAC                      : 1
Port security protect action                   : restrict 
Traffic optimize TCP adjust MSS(bytes)         : 1380
Traffic optimize broadcast suppression(pps)    : -
Traffic optimize unicast suppression(pps)      : -
Traffic optimize multicast suppression(pps)    : -
----------------------------------------------------------------------------------------
Traffic Type                        Direction  AppliedRecord                            
----------------------------------------------------------------------------------------
traffic-filter                      inbound    IPv4 ACL 3012                            
----------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------
Traffic Type                        Direction  RemarkType  RemarkValue  AppliedRecord    
----------------------------------------------------------------------------------------
traffic-remark                      outbound   802.1p      2            IPv6 ACL 3011    
----------------------------------------------------------------------------------------
---------------------------------------------------------------------------

# Display information about the AP wired port profile dj (Eth-trunk is configured).

<HUAWEI> display wired-port-profile name dj
----------------------------------------------------------------------------    
Port link profile             : default                                         
Description                   :                                                 
Ethernet trunk ID             : 0                                               
----------------------------------------------------------------------------

**Table 2** Description of the **display wired-port-profile name** *profile-name* command output
Item	Description
Port link profile	Name of the AP wired port link profile referenced by an AP wired port profile. To configure the parameter, run the port-link-profile (AP wired port profile view) command.
Description	Interface description. To configure the parameter, run the description (AP wired port profile view) command.
STP	STP status on a wired interface. To configure the parameter, run the stp enable (AP wired port profile view) command.
Port work mode	Working mode of a wired interface. root: indicates the root mode. endpoint: indicates the endpoint mode. middle: indicates the middle mode. -: indicates that the working mode of wired interfaces is not changed. To configure the parameter, run the mode (AP wired port profile view) command.
Port Tagged VLAN	VLAN to which a wired interface is added in tagged mode. To configure the parameter, run the vlan (AP wired port profile view) command.
Port untagged VLAN	VLAN to which a wired interface is added in untagged mode. To configure the parameter, run the vlan (AP wired port profile view) command.
Port PVID VLAN	PVID of a wired interface. To configure the parameter, run the vlan pvid (AP wired port profile view) command.
User isolate mode	User isolation status on a wired interface. To configure the parameter, run the user-isolate (AP wired port profile view) command.
DHCP trust port	Status of the DHCP trusted interface function. To configure the parameter, run the dhcp trust port command.
ND trust port	Status of the ND trusted interface function. To configure the parameter, run the nd trust port command.
Ethernet trunk ID	ID of the Eth-Trunk interface.
IPSG switch	Whether IP source guard (IPSG) is enabled on an AP's wired interface. To configure the parameter, run the ipsg enable (AP wired port profile view) command.
DAI switch	Whether DAI is enabled on an AP's wired interface. To configure the parameter, run the dai enable (AP wired port profile view) command.
STP auto shutdown switch	Whether STP-triggered port shutdown is enabled on an AP's wired interface. To configure the parameter, run the stp auto-shutdown enable (AP wired port profile view) command.
Auto shutdown recovery time	Recovery time of the shutdown port triggered by STP. To configure the parameter, run the stp auto-shutdown recovery-time (AP wired port profile view) command.
Learn client IPv4 address switch	Whether terminal IPv4 address learning is enabled on an AP's wired interface. To configure the parameter, run the learn-client-address enable (AP wired port profile view) command.
Learn client IPv6 address switch	Whether terminal IPv6 address learning is enabled on an AP's wired interface. To configure the parameter, run the learn-client-address enable (AP wired port profile view) command.
IGMP-Snooping switch	Whether IGMP snooping is enabled on an AP's wired interface. To configure the parameter, run the igmp-snooping enable (AP wired port profile view) command.
MLD-Snooping switch	Whether MLD snooping is enabled on an AP's wired interface. To configure the parameter, run the mld-snooping enable (AP wired port profile view) command.
Port security switch	Whether port security is enabled on an AP's wired interface. To configure the parameter, run the port-security enable (AP wired port profile view) command.
Port security sticky MAC	Whether the port security and sticky MAC functions are enabled on an AP's wired interface. To configure the parameter, run the port-security mac-address sticky (AP wired port profile view) command.
Port security maximum MAC	Maximum number of secure MAC addresses that can be learned by an interface. To configure the parameter, run the port-security max-mac-num (AP wired port profile view) command.
Port security protect action	Protection action to be taken when the number of secure MAC addresses learned by an interface reaches the maximum. protect: The interface discards packets with source MAC addresses that are not in the MAC address table. restrict: The interface discards packets with source MAC addresses that are not in the MAC address table and sends a trap message. To configure the parameter, run the port-security protect-action (AP wired port profile view) command.
Traffic optimize TCP adjust MSS(bytes)	Maximum segment size (MSS) of TCP packets on an AP's wired interface. To configure the parameter, run the traffic-optimize tcp adjust-mss command.
Traffic optimize broadcast suppression(pps)	Maximum broadcast traffic volume that can be received on an AP's wired interface. To configure the parameter, run the traffic-optimize (AP wired port profile view) command.
Traffic optimize unicast suppression(pps)	Maximum unknown unicast traffic volume that can be received on an AP's wired interface. To configure the parameter, run the traffic-optimize (AP wired port profile view) command.
Traffic optimize multicast suppression(pps)	Maximum multicast traffic volume that can be received on an AP's wired interface. To configure the parameter, run the traffic-optimize (AP wired port profile view) command.
Traffic Type	ACL-based packet filtering and re-marking implemented by the AP wired port. traffic-filter traffic-remark
Direction	Incoming or outgoing packets.
AppliedRecord	IPv4/IPv6/L2 packet filtering and re-marking based on ACLs.
RemarkType	Protocol type. dscp dot1p
RemarkValue	Protocol type value. dscp: 0-63 dot1p: 0-7